xiQ - Technical Manual Version 1.0
16
3.
Hardware Specification
3.1.
Power Supply
The xiQ cameras are powered via the USB 3.0 Micro-B connector. The input voltage is 5 V DC. The power consumption is 1.0 -
1.8W depending on the xiQ model.
Power supply, via USB 3.0 system connector:
•
5 V (nominal)
•
4.45 V to 5.25 V (at the connector of hub or root port)
3.2.
General Specification
3.2.1.
Environment
Description
Symbol
Value
Optimal ambient temperature operation
T
opt
+10 to +25 °C
Ambient temperature operation
T
max
-10 - +55 °C
Ambient temperature for storage and transportation
T
storage
-25 - +70 °C
Relative Humidity, non-condensing
RH
80 %
table 3-1, environment
Housing temperature must not 65°C. The following parameters are not guaranteed if the camera is operated outside
the optimum range:
•
Dark current
•
Dynamic Range
•
Linearity
•
Acquisition and readout noise
•
S/N ratio, durability
3.2.2.
Firmware / Host driver / API features
Description
Value
Interpolation methods
9331, SHT_advanced
White balance coefficients ranges
0.0 to 3.9
Sharpness filter
0 to 100 %
Gamma
0.3 to 1.0
Full color correction matrix (3+1)x3 coefficients ranges
-3.9 to 3.9
table 3-2, firmware / API features
More details on API/SDK features are available at
XIMEA support pages: http://www.ximea.com/support