xiQ - Technical Manual Version 1.0
17
3.3.
Lens Mount
The xiQ cameras are compatible with C-mount and CS-mount lenses.
figure 3-1, position C/CS-Mount module B
The cameras are delivered with C-mount back focal length. By removing the “C/CS-Mount module B” (see the figure above) the
camera can be rebuilt to CS-mount compatibility. The required M2x8mm special screws are part of the camera delivery.
The length of the lens thread is 6.5 mm.
Note: The distance between the threaded flange and the surface of the filter glass is 11.9 mm in case of C-Mount and 6.9 mm
in case of CS-Mount. To avoid damaging of the filter glass, nothing may extend deeper into the housing.
Lens mount adapter configuration:
•
C-Mount (with C/CS Mount module B)
•
CS-Mount (without C/CS Mount module B)
3.3.1.
Screws
All mounting screws are customized M2 screws with different lengths.
Technical details:
Material
Steel
Surface
Black zinc
Thread
M2
Driver
PH 00
Avail. Lengths
2mm – 24 mm
table 3-3, custom screws, technical details
Drawings, e.g. with 10mm length:
figure 3-2, xiQ mounting screws
Note: Never exceed a maximum torque of 0.3Nm when fastening the M2 mounting screws.
4
x
M
2
m
ax
. d
ep
th
2
.9
m
m
m
od
.:
1
9
x
1
8
m
m
C
-m
ou
nt
1
4
x
1
8
m
m
C
S
-m
ou
nt
C
/C
S
-M
ou
nt
m
od
ul
eA
Re
m
ov
e
th
is
m
od
ul
e
fo
r
C
S
m
ou
nt
b
ac
k
fo
ca
l d
is
ta
nc
e
C
/C
S
-M
ou
nt
m
od
ul
e
B
front view
side view