xiQ - Technical Manual Version 1.0
37
3.6.
User interface – LEDs
Three status LEDs are located on the back of the cameras, please see below.
figure 3-24, position status LEDs
The LEDs Status1 and Status2 are programmable. Please note the following description:
LED
Color
Description
Power
Orange
Power indication: LED is on if the power is on (USB 3.0 cable connected)
Status 2
Green
██████████
USB 3.0 Enumeration
██░░██░░██
USB 2.0 Enumeration (default),
User configurable:
register (set value)
strobe
busy
streaming
trigger
██████████
level
██░░░░░░░░
edge
digital input
slow blink
fast blink
Status 1
Red
█░░░███░░██
Streaming (default),
User configurable:
register (set value)
strobe
busy
streaming
trigger
██████████
level
██░░░░░░░░
edge
digital output
slow blink
fast blink
table 3-18, LED output description
PN: MQ013CG-CM
32301551
Isol ated I/O 24V 20mA max.
For use with XIMEAapproved connection cables onl
y.
5V
(<1.5W)
Based on the USB-IF ’s USB 3.0 specific ation.
USB 3.0 SuperSpeed
M
ad
e
in
E
U
STATUS 1
STATUS 2
POWER
LED positions
Status 1
Status 2
Power