XiNCOM Corp.
Settings – Dynamic DNS
Dynamic DNS
Service
Use this to Enable/Disable the Dynamic DNS feature, and select the required
service provider.
•
Disable
– Dynamic DNS is not used.
•
TZO
– Select this to use the TZO service (www.tzo.com). You must configure
the
TZO
section of this screen.
•
Standard Client
– Select this to use the standard service (from
www.dyndns.org or other provider). You must configure the
Standard Client
section of this screen.
•
3322(in China)
– This is available in China. It is similar to “Standard client”
WAN Port
Binding
•
Select the WAN port on which the Dynamic DNS is used.
•
The "Force Update" button will update your record on the Dynamic DNS
Server immediately.
TZO Custom
Dynamic DNS
Service
If you have registered for this service, complete these fields.
•
Key
– Enter your Key, as recorded on the TZO Web site.
•
– Enter your E-mail address, as recorded on the TZO Web site.
•
Domain
– Enter the domain name allocated to you by TZO.
Standard
Client or 3322
If you have registered for this service, complete these fields.
•
User Name
– Enter the user name recorded by the service provider.
•
Password
– Enter the password recorded by the service provider.
•
Verity Password
– Re-enter the password above.
•
Server
– Enter the name or IP address of the service provider's Server.
•
Host Name
- Enter the domain name allocated to you by the service provider.
Additional
Standard
Client or 3322
Settings
These options are available if using the standard client.
•
Enable Wildcard
– If selected, traffic sent to sub-domains (of your Domain
name) will also be forwarded to you.
•
Enable backup MX
– If enabled, you must enter the
Mail Exchanger
address
below.
•
Mail Exchanger
– If the setting above is enabled, enter the address of the
backup Mail Exchanger.
Page 41
