Configuring the XC-DPG603 for your LAN
a
1.
2.
3.
4.
5.
6.
7.
8.
9.
Procedure
Use a standard LAN cable to connect your PC to any LAN port on the XC-DPG603.
Connect the power adapter and power up the XC-DPG603. Only use the power adapter
provided with the product; using a different one may cause hardware damage.
Start your PC or restart your PC if it is already running. Once restarted, the PC will then
obtain an IP address from the XC-DPG603.
Start your WEB browser.
In the
Address or Location
box enter:
HTTP://192.168.1.1
You will be prompted for the User Name and password, as shown in Figure 1.
Enter
admin
for the “User Name” and leave the “Password” blank.
• The
User Name
is always set to
admin
• You can and should set a password, using the following Admin Password screen
After the login, you will then see the Admin Password screen, as shown in Figure 2.
Assign a password in both the
Password
and
Verify Password
fields and press the
Submit
button.
From the setup menu, select
Basic Setup
and then
LAN & DHCP
from the submenu.
You will see a screen like the example in Figure 3.
No Response?
Is your PC using a Fixed IP address?
If so, you must configure your PC to use an IP address within the range
192.168.1.2 to 192.168.1.254, with a Network Mask of 255.255.255.0. See
Appendix B – Windows TCP/IP Setup for details.
Be sure to check for the following:
• the XC-DPG603 is properly installed
• the Ethernet cable to the XC-DPG603 is properly attached
• the XC-DPG603 is powered ON
Figure 2. Admin Password
Figure 1. Password Dialog
10
Twin WAN Gateway
XC-DPG603