background image

Specification

System:                                                                  Stereo audio digital to analog converter

Temperature:                                                          +5

°

C~+35

°

C

Humidity                                                                 5%~85%

Power Specifications                                              Specified on rear panel decal

Power Consumption                                               max. 25W

Frequency Range                                                    20Hz-20KHz, 0.5dB

Dynamic Range                                                      114dB

                                                                              100dB  (USB input)

THD +N                                                                  0.0008%(

)

                                                                               0.002%  (USB input)                                                        

Signal-To-Noise Ratio                                             114dB

                                                                               105dB  (USB input)

                                           -120dB

Pass Band GainInequality                                      0.00001dB

Digital Coaxial Input                                                0.5Vp-p

Digital Coaxial Input Impedance                              75Ω

Channel Gain Inequality                                         <0.05dB

Output Voltage                                                       2V(RMS,0dB)

                                                                               0.002%  (USB input)

Dimensions(WΧHΧD)                                            430mmx104mmx340mm 

    

 

 

NOTE

  Specification and design subject to change without notice for improvements.

                       

With A-Weighted

Interchannel Crosstalk

Chapter 4

4.2 Specification

8

DAC-8

Summary of Contents for DAC-8












Reviews: