XA8550T
4
Introduction
Chapter 2
2.2
Front Panel & Rear Panel
XA8550
u v
u
v
Power button
This button connects and disconnects the XA8550 from the AC mains power. By using the button to turn the
system on and off.
Power on indicator
W
hen this unit is switched on, the indicator will glitter, which shows the system is in pre-heating model. About 5
seconds later, the indicator will stop glittering and keep light When the system is in protected model, the
indicator will be glittering all the time.
u
v
Audio Input
Connect the input signal by RCA.
Right Loudspeaker Binding Posts
To output the amplified audio signal and be
connected to the right channel speaker with
loudspeaker cable.
Power supply input jack
Connect it to the power supply by attached power
Cord.
w
Left Loudspeaker Binding Posts
To output the amplified audio signal and be
connected to the left channel speaker with
loudspeaker cable.
Signal Output
This output signal could be connected to the
loudspeaker or other amplifier.
Front Panel
Rear Panel
u v
w
x y
~
左
右
左
右
信号输出
!!
x
y
