Operation Instruction
Chapter 3
3.1 Connection
XA8550
1
.Before using this machine, you have to connect it to sound sources (such as CD player, DVD player, SACD player) by signal cable. Also
you need to check if the signal connection of the left and right channel is correct and reliable.
2.Before connecting the machine to the right and left channel speaker by speaker cables, it’s strongly suggested that you consult the
dealer if your speaker cable is available for this machine and make sure of the right channel and polarity.
3.Please be very careful when connecting the power cable. Make sure the power supply has been cut off before connecting to the
accessory power cable. If you do have to use other power cables, please check if the specifications are up to the requirements of this
machine. We claim that we are not reliable for the damages caused by the use of other power cables.
Please make sure all the power supplies have been cut off before connecting any
cable to this machine. If you have no ability to install this machine, please ask
those who are guided or are capable to accomplish the installation or connection.
!!
XA8550 Power Amplifier
Right Channel Loudspeaker
~
左
右
左
右
信号输出
L
R
L
R
Pre-Amplifier
S2
S3
S1
S4
Input
IR Sensor
Power
Volume
Max.
Min.
VACUUM TUBE PRE-AMPLIFIER XA3250
L
R
L
R
CD or SACD Player
Left Channel Loudspeaker
Output
Output
Input
Connection to
Power Supply
5
