44
--
HSBLC
: Highlight Suppression Back Light Compensation.
1. Select an HSBLC mode and click the Save button. Then HSBLC OSD windows will be appears.
2. Click the Enter button for HSBLC SETUP OSD menu.
3. Use for masking brightness of the specific area to view the subject more clearly. The HSBLC
mode is automatically activated only in low luminance scene.
- AREA SETTING: Use [Left Direction] or [Right Direction] button to select an area then use
[Upper Direction] button or [Lower Direction] button to select [ON] or [OFF]. Click [Enter] button to
exit the area setting menu.
- GRAY SCALE: Use [Left Direction] or [Right Direction] button to select a gray scale.
(GRAY
⇔ D.GRAY ⇔ BLACK)
- USER SCALE: Use [Left Direction] or [Right Direction] button to select a bright level. (5 levels)
- MASK: Use [Left Direction] or [Right Direction] button to select [ON] or [OFF].
If you set MASK to ON, the mask function is activated only when the HSBLC is activated by auto
mode.
Level:
Select a level according to Mode selection.
AGC:
Select an AGC level according to Mode selection.
NOTE
If you set [AGC] to OFF, then the [Day and Night Auto], [SENS-UP] and [3D-DNR] are not available.
Shutter speed:
Select a Shutter speed option.
--
X64 to X2:
Set to the slow shutter.
--
Auto:
Adjust the shutter speed automatically.
--
Off:
Fix to the shutter speed.
--
AntiFlk:
Set the shutter to anti-flick mode.
-- 1/160 to 1/10000: Set to the fast shutter.
NOTES
- If you set [Shutter speed] to Auto, then the [WDR] and [SENS-UP] are available.
- If you set [Shutter speed] to AntiFlk, then the [WDR] is available.
- In Shutter speed mode, the [WDR] and [SENS-UP] are not available, except that the mode is Auto
or AntiFlk.
Sens-Up:
If pictures are not clear due to darkness, this SENS-UP operation would increase the
sensitivity of picture.
--
Off:
Not in use.
--
Auto:
Adjust the sensitivity of the picture automatically.
Sens-Up level:
Select the Sense-Up level (x2 to x64).
NOTE
If you set to one of the SHUTTER options except AUTO on the [SHUTTER] menu or [AGC] to OFF,
the [SENS-UP] setting is not available.