深圳市星科创科技有限公司
Shenzhen XingKeChuang Technology Co., Ltd.
Phone: 86-0755-33523599 FAX: 86-0755-33515410 URL: http://www.sz-xkc.com
Address:
11th Floor, No. 48, Xinyu Road, Xinqiao Community, Xinqiao Street, Baoan District, Shenzhen
5
/
9
8th.Function and usage
1. On/off button: If it is not turned on, press and hold the “On/Off button” to display the sensitivity value; if it is
turned on, press and hold the
“On/Off button” to shut down.
2. "+" "-" key: Press the sensitivity "+" or "-" to adjust the sensitivity to a suitable value. When there is no liquid
at the position to be detected, the buzzer will sound. Press the "+" and "-" keys to adjust the sensitivity
appropriately to achieve more precision.
3. Indicator light: the blue light is on when the liquid is detected, and the buzzer sounds. The blue light goes
out after leaving the test target. When the battery is low, the red light flashes once every 2 seconds.
4. Output protection: When the OUT terminal of the output port is directly connected to a voltage of 5-24V, it
will automatically be forced to shut down.
5. Digital tube display: sensitivity adjustment range 1-100. When the battery voltage is lower than half, the
digital tube will automatically reduce the brightness to save power consumption.
6. Automatic shutdown: automatic shutdown after 5 minutes when unmanned operation "+" "-" or no induction,
to avoid forgetting to shutdown after use and running out of power.
7. Liquid detection: move down from the top of the container for detection. When liquid is detected, the blue
indicator light will be on and the buzzer will alarm
。
9th.Detection steps
