42
15
n
Receiving a Call
When a call is received, t
If the caller can be identified, the caller's
phone number is displayed. If the caller
cannot be identified, only the
displays.
1. To answer the call, press the
key. If
you
have
activated
the
Auto
Answer
function, when the handset is on the
base, simply lift it up to answer.
he
indicator
on
the
base
will
blink.
The
information will appear, too.
information
If you have a voice
message, the "
" and
icon
will be show on the LCD.
2. You can speak. To end the call, either
press the
key or replace the handset
on the base.
In use
New
Call
New Call
MSG WTG ON
Result:
After you hang up the call, the LCD
displays the talk time.
Notes
Up
:
You can select the ringer volume during the
incoming call by using the
key.
If you want to delete the
icon, press the
key in standby mode, then press and
hold the
key. (The handset must be
registered to the base.)
If the polyphonic ring tone is set, the ring
tone may continue for 4 seconds after the
caller's hang-up or after the parallel phone
had answered the calling.
4
ghi
TAM Functions
n
Announcement
It is necessary to record the announcement which
requests the caller to leave a message when
nobody is at home. The answer and record
message
(Announce1)
and
the
answer
only
message (Announce2) can be up to 3 minutes
respectively.
Auto-answer
Announce1
is
a
conventional
message requesting you to leave a message. If
you have not record Announce1 before, the unit
will play the default one "
".
Record Announce1
Hello, your call
cannot be taken at the moment, to record
your message, please speak after the tone
2. Press the
soft key to choose
.
3. Press
key again to choose
.
4. Press the
key repeatedly to choose
,
press the
soft key.
5. You can record your announcement after a tone.
Recording
will
stop
automatically
after
3
minutes. You can also confirm and end the
recording by pressing the
key. During
recording the LCD shows "
".
Select
Announce
Select
Announce1
Record
Select
OK
Recording...
If
you
want
to
change
Announce1,
do
the
following steps to update it:
1. Press the
soft key in Standby mode.
TAM
