Fujian Xingyi Polishing Machine Co.,Ltd
Factory:No. 34, Juxian Road, Anping, Anhai Town, Jinjiang City,Quanzhou,Fujian Province, China
Postal Code:362200 Tel: +86-595-36792986 www.xy1118.com
Email:admin@polishingmachine.cc
11. Main electric cabinet key lock: used to lock the electric cabinet.
3.5 Fast connector
Fast connector consists of front and rear part
(
As follows
)
,the front part is usually
assembled with the vacuum nozzle of the grinder (screw the front part into the vacuum tube
connection and screw it tightly), the rear part is matched with the vacuum tube (Screw the
copper wire suction tube into the back and tighten).
①
Front part
②
Rear part
3.6 Water tank
There is a water inlet in front of the water tank. The heat dissipation openings on both
sides of the water tank make the heat dissipation of the inverter box of the equipment faster,
and can extend the service life of the electrical appliances inside the inverter box.
In the manual water grinding , press the front spray switch in the display (F7)(as shown in
Figure 1) to spray water in front of the machine; Rotary the water switch , and the machine
chassis will spray water for water grinding(as shown in Figure 2).