Fujian Xingyi Polishing Machine Co.,Ltd
Factory:No. 34, Juxian Road, Anping, Anhai Town, Jinjiang City,Quanzhou,Fujian Province, China
Postal Code:362200 Tel: +86-595-36792986 www.xy1118.com
Email:admin@polishingmachine.cc
which may cause dangerous accidents;
When rotating the support wheel, always pay attention to the height of the grinding disc
from the ground. Be careful not to make the grinding disc too low. When it is too low, the
grinding disc will cause collision with the ground and damage the grinding disc
;
Rotate ans lower the support wheel to raise the grinding machine from the working area.
It is recommended that the lowest position of the grinding disc is 25mm from the ground.
5.4.3 Machine package position
Adjust the position of the swing lever, foot pedal and handle to the packaging position.
The minimum package size is as follows and the machine can be packaged according
to the specific size.