Fujian Xingyi Polishing Machine Co.,Ltd
Factory:No. 34, Juxian Road, Anping, Anhai Town, Jinjiang City,Quanzhou,Fujian Province, China
Postal Code:362200 Tel: +86-595-36792986 www.xy1118.com
Email:admin@polishingmachine.cc
2.2 Operation safety guidance
1. It is strictly prohibited to operate when the electricity is less than 20%, especially
on slopes, avoiding personal injury.
2. When working on the slopes, please check the battery’s electricity should be
more than 40%, the power supply shall not be lower than 350V and the clutch is locked.
3. If the machine must be work on slopes, it should be less than 25 degrees, the
company is not responsible for any accident caused by the operation when the slope is
greater than 25 degrees.
4. Suitable clothes for the job and work place are necessary, such as safety shoes,
safety helmets, hearing protection, non--fogging vented goggles and dust respirator.
5. Make sure there is no oil leakage, electric leakage, water leakage on the
machine before using.
6. Make sure the machine control switches and electric parts are in good
conditions without moisture.
7. Make sure no obstacle or human people at working ans there is enough lighting
device.
8. The anti-dust tape should be installed on the machine for safety. It is necessary
to connect to industrial vacuum cleaner when dry grinding.
9. The machine should be connected to appropriate electrical outlet. Only electric
cables that can withstand high current is allowed.(Instruction of power cable)
10. Do not adjust handle rod while machine is in operation, it is allowed to adjust
until the switch is pressed and machine is stopped.
11. The handle has different functions when in different positions, please read the
manual for more information.
12. Ensure the machine is stopped and the emergency stop button is pressed
when changing abrasives or accessories. If necessary, disconnect the power and the
plug.