Fujian Xingyi Polishing Machine Co.,Ltd
Factory:No. 34, Juxian Road, Anping, Anhai Town, Jinjiang City,Quanzhou,Fujian Province, China
Postal Code:362200 Tel: +86-595-36792986 www.xy1118.com
Email:admin@polishingmachine.cc
starts. (Safely and normally start the machine, the running light will light up, if not normally start,
then there will be the error code showed on the display screen)
Turn on the grinder and press the emergency stop switch to see if the machine stops.
Turn on the emergency stop switch and turn on the two light switches on the panel (on the
remote control) to check if the corresponding light is on.
Turn on the emergency stop switch and open the two water switches on the panel (on the
remote control) to check whether the corresponding water spray system is spraying.
Note:
For safety reasons, it is strongly recommended to press the emergency stop switch when
stopping the device, which would be safer.
When starting the machine, it is recommended to press the handle to lift the machine
slightly, reduce the pressure of the grinding disc, and reduce the friction between the grinding
abrasive and the ground, so as to avoid motor overloading when starting the machine.
7.2.2 Check the disc cover
When there is a large amount of dust, it is easy to cause dust nozzle of grinding disc cover
clogged by dust, use flashlight to see if there is dust clogged, clean up if necessary.
7.2.3 Check the grinding plate
In the case of long hours of work or a large amount of dust, the grinding plate of grinding
head may be stained with dust. It will lead lack of connection between grinding head and plate,
which will affect grinding efficiency even lead to abrasive drop and cause accident. In view of
this situation, please remember to clean up in time.
7.2.4 Long-term storage of batteries
Stored for a long time, the machine battery should be maintained and charged once every
month
Stored longer more than 1 months, please take the battery out of the remote control
device.
7.2.5 Note