Fujian Xingyi Polishing Machine Co.,Ltd
Factory:No. 34, Juxian Road, Anping, Anhai Town, Jinjiang City,Quanzhou,Fujian Province, China
Postal Code:362200 Tel: +86-595-36792986 www.xy1118.com
Email:admin@polishingmachine.cc
machine should be stored in a dry place;
12. After the power is turned off and the panel indicator light is still on, it indicates that there
is still high voltage inside the inverter, which is very dangerous. Do not touch the uninsulated
electrical machine parts;
13. The machine motor and the frequency conversion box are prohibited from entering the
water; (the other damage caused by the water inflow then the machine is not working properly,
the manufacturer does not afford the warranty)
14. The machine must be connected to the qualified wire and voltage, specifications is
noted by the manufacturer. (The label on machine indicates the power supply specifications)
3. Machine Description
3.1 Overview
The HTG-820RC is used to grind (rough grind, fine grind and polish) concrete, natural
stone and terrazzo floors or other materials specified in this manual or recommend by XINGYI.
It can be used in a variety of applications from rough grinding to fine polishing. This machine is
expected to be used in commercial applications such as hotels, schools, hospitals, factories,
offices and other places.
The HTG-820RC is equipped with a radio control, which allows remote control of the
movement of the machine at a certain distance, it is feasible to complete setup changes and
operations with a few buttons; the digital display on the panel allows the operator to adjust and
monitor system information easily, making it easier for users to operate. It comes with a
3.5-inch digital color display.
Equipped with water tank, the machine can not only dry grinding but also wet grinding. The
advantages of wet grinding are as following: the surface grounding is good, the cutting amount
is small, and it is easy to emit light. It is suitable for later stone polishing. Users can choose