4-3 OIL PUMP
CHECKING OIL PUMP
Use the special tool.to check the pump for capacity by measuring the amount of oil the pump draws
during the specified interval.
●
Remove the frame covers.
●
Have the tool filled with CCI SUPER OIL and connect it to the suction side of the pump.
●
Run the engine at 3000r/min.
●
Holding engine speed at the same 3000r/min.let the pump draw for 6 minutes.for this
operation.the reading taken on the device should be 0.9-1.1ml.
Oil discharge amount
0.9-1.1ml at 3000r/min for 6 minutes
Caution : During this inspection.strictly follow the following points.
The machine should be rest on the center stand.
Do not touch the rear wheel while running the engine.
- 29 -