OWNER’S/OPERATOR’S
MANUAL
4. DAILY PRE-RIDE INSPECTION
4-1
WARNING
You must inspect your UTV each time before riding to ensure it is in proper working
order. If proper inspection is not done, severe injury or death could result.
Use the following checklist to verify your machine is in proper working order each
time you ride.
ITEM/ INSPECTION PROCEDURE
1. Tire
—
check condition and pressures.
2. Fuel tank
—
checking for leaking, fill the fuel tank to its proper lever.
3. All brakes
—
check fluid level, check operation, adjustment (includes parking
brake).
●
Brake pedal
Check for correct brake pedal free play. If the brake pedal free play is incorrect, have
an authorized dealer adjust it. Check the operation of the brake pedal. It should move
smoothly and there should be a firm feeling when the brakes are applied. If not, have
the vehicle inspected by your dealer.
●
Brake fluid leakage
Check to see if any brake fluid is leaking out of the pipe joints or the brake fluid
reservoir. Apply the brakes firmly for one minute. If there is any leakage, have the
vehicle inspected by an authorized dealer.
●
Brake fluid level
Check the brake fluid level.
Add fluid if necessary.
●
Brake operation
Test the brakes at slow speed after starting out to make sure they are working
properly. If the brakes do not provide proper braking performance, inspect the brake
system.
4. Throttle / Accelerator pedal
—
check for free operation, closing and free play.
Check to see that the accelerator pedal operates correctly. It must operate smoothly
and fully spring back to the idle position when be released.
Have an authorized dealer repair as necessary for proper operation.
5. Headlight / Taillight / Brake light
—
check operation of all indicator lights and
