OWNER’S/OPERATOR’S
MANUAL
16. MAINTENANCE
16- 7
Checking the brake fluid level
Insufficient brake fluid may let air enter the brake
system, possibly causing the brakes to become
ineffective. Before riding, check that the brake
fluid is above the minimum level mark and
replenish if necessary. A low brake fluid level may
indicate worn brake pads and/or brake system
leakage. If the brake fluid level is low, be sure
to check the brake pads for wear and the brake
system for leakage.
The brake fluid reservoir is located under the
hood.
When checking the fluid level, make sure the top of the brake fluid reservoir is
level.
Use only the recommended quality brake fluid. Otherwise, the rubber seals may
deteriorate, causing leakage and poor braking performance.
Recommended brake fluid: DOT 3
Refill with the same type of brake fluid. Mixing fluids may result in a harmful
chemical reaction and lead to poor braking performance.
Be careful that water does not enter the brake fluid reservoir when refilling. Water
will significantly lower the boiling point of the fluid and may result in vapor lock.
Brake fluid may deteriorate painted surfaces or plastic parts. Always clean up
spilled fluid immediately.
Have an authorized dealer inspect the brake system if the brake fluid level goes
down.
Brake pedal and accelerator pedal lubrication
Lubricate the pivoting parts.
Recommended lubricant:
Lithium-soap-based grease
(all-purpose grease)
