- 5 -
⚫
Run and maintenance
Warning
1
.
Do not touch terminals after power on.
Otherwise, an electric shock may occur.
2
.
Do not connect or move the wires when power on.
Otherwise, an electric shock may occur.
3
.
Make sure to stop the PLC before changing the controller program.
Otherwise, malfunction may occur.
Caution
1
.
Do not disassemble and assemble product arbitrarily.
Damage to product may occur.
2
.
Plug and connect cables on the condition of power off.
Otherwise, cable damage or malfunction may occur.
3
.
Do not wire the idle terminals.
Otherwise, malfunction or damage may occur.
4
.
Cut off the power when disassemble expansion modules, external devices and batteries.
Otherwise, malfunction and fault may occur.
5
.
Dispose them as industrial waste when out of use.