Changing the Chiselling Position (Vario-lock)
The chisel can be locked in 12 positions. In this manner, the optimum working position can be set for each
application.
Insert the chisel into the tool holder.
Push the Move limited ring 3 forward and turn the chisel to the required position with the Move limited
ring 3.
Release the Move limited ring 3 and turn the chisel until it latches.
Shock absorption Equipment 4
The XP-G55VC is equipped with an active vibration reduction system, which cuts vibration of that of the
without Active Vibration Reduction. This may significantly reduce the exposure level over the total
working period. protect the operator form the effects of vibration.
Maintenance and Service
Maintenance and cleaning
Before any work on the power tool itself, pull the mains plug.
For safe and proper working, always keep the power tool and the ventilation slots clean.
A damaged
hammer rod protector
should be changed immediately
.
We recommend having this carried out
by an after-sales service.
1. Inspecting the drill bits
Use a dull accessory, such as bull point, cutter, etc., will cause motor malfunction and
efficiency degraded. Replace with a new one when your accessory is abased.
2.
Check all external parts of the tool for damage at regular intervals. Do not operate the tool if parts are
damaged. If necessary, your power tool should be repaired at a xinpu authorized service center .
3. Inspecting the mounting screws
Regularly inspect all mounting screws and ensure that they are properly tightened. Any loose should
be tighten immediately, failure to do maybe cause serious hazard.
4. Indicator 7
When the carbon brushes are worn out, the power tool switches itself off. This is indicated beforehand by
the lighting or blinking of the indicator 7. The power tool must then be sent to an after-sales service agent.
If the power tool should fail despite the care taken in manufacturing and testing procedures, repair should
be carried out by an after-sales service center for XINPU power tools.
Warranty
For the condition of warranty, please refer to the separately provided warranty card.
Environment
Faulty and /or discarded electrical or electronic apparatus have to be collected at the
appropriate recycling location.
NOTE:
Due to XINPU’S continuing program of research and development, the specifications herein are subject to
change without prior notice.
