9
Warning!
This power tool produces an electromagnetic field during operation. This field may under
some circumstances interfere with active or passive medical implants. To reduce the risk of serious or
fatal injury, we recommend persons with medical implants to consult their physician and the medical
implant manufacturer before operating this power tool.
Attention!
Through poor conditions of the electrical MAINS, shortly voltage drops can appear when starting the
EQUIPMENT. This can influence other equipment (eg. Blinking of a lamp). If the MAINS-IMPEDANCE
Zmax<0.276OHM, such disturbances are not expected. (In case of need, you may contact your local
supply authority for further information).
Name of the parts
1
Retainer
2
Head cover
3
Aluminum head
4
Second handle
5
Fan cover
6
Encloser
7
Switch
8
Main handle
Mounting tool bits
Warning: before do it, make sure unplug the machine!
(1) Pull out of the retainer "2", turning 180
℃
clockwise or anticlockwise, insert the
accessory shank portion"1" into the hole on the front cover.
(2) Turning the retainer back into original position.
3. Assembly