ECDIS User manual
19
waypoint, click the left button, the waypoint is moved to the specified position of the cursor,
right click to exit the edit waypoint operation. You can save the edited route by clicking
the menu "Save Route" button. Click the left button above the route segment between
the two waypoints to insert the waypoint. When you need to insert the waypoint at a
position other than the route segment, you can first insert the waypoint on the route
segment and then move the cursor to the desired insertion. position.
2.2.3 Deleting waypoints
Click the “Delete Waypoint” button, the mouse will automatically jump to the chart center.
At this time, enter the delete waypoint point, select the waypoint to be deleted, click the
left button, and the selected waypoint will be deleted. The waypoint number following the
deleted waypoint is changed and numbered sequentially. Right-click to exit the status to
delete the waypoint and click the “Save Route” button to save the edited route.
2.2.4 Locking the route
Click the “Lock Route” button, the currently selected route will be fully displayed in the
center of the chart at the maximum scale. Before the route is locked, as shown in the
figure:
2.2.5 Deleting a route
Click the “Delete Route” button to pop up the route list as shown below:
