ECDIS User manual
26
Click the shortcut key [Settings] on the right, select the “System” interface, and select the
device in the system type to be ECDIS (Host) or ECDIS Backup (ECDIS Backup System).
When the host and the backup system interact, view the interaction log, as shown in the
following figure:
2.2.14 Settings
The setting of the route design is to set the default values of the safety distance and the
steering radius during the design a route. The default value of the safety distance and the
steering radius when designing the route design is the value at the time of setting.
Check the route monitoring display comment. When the route is monitored, the route will
cross the commented area or the object pop-up comment box. If you uncheck the box, the
prompt box will not pop up when you cross the commented area. The setting interface is
as follows:
