3-2
RealPort CardBus Ethernet 10/100+Modem 56 User’s Guide
4
Click the Adapters tab. The Network Adapters window opens.
5
Click Add. The Select Network Adapter window opens.
6
Click Have Disk and type the path to the Xircom CD-ROM.
7
Click OK. The Select OEM Option window opens.
8
Click OK. The Windows NT Setup window briefly displays.
9
The Xircom CardBus 10/100+Modem 56 Settings window
opens, displaying the default settings.
In most circumstances, the default settings will properly
operate the adapter. However, consult the README file on
the Xircom CD-ROM for the latest recommendations.
10
Click OK. The Network Settings window redisplays.
11
Click Close. If any dialog boxes appear related to setting up
network protocols, click Cancel, and contact your Network
Administrator.
12
When the Network Settings Change window opens, click Yes
to restart the computer.
Modem Setup
13
After the computer has been restarted, select Modems from the
Control Panel.
14
At the Install New Modem screen make sure that the
Don’t
detect my modem; I will select it from a list
checkbox is NOT
checked. Click Next. NT will query the COM ports to find the
Xircom modem. Click Next. If a
Standard Modem
is found,
click Change. On the next screen, click Have disk. Type the
path to the Xircom CD-ROM. Verify that the Xircom CardBus
modem is selected, then click OK.
15
At the Install New Modem screen click Finish.
16
At the Modems Properties screen click Dialing Properties... to
set up dialing properties (not necessary if a modem had been
previously installed). Click Close.
17
Use Start/Run to execute A:\SETUP.EXE from the Xircom
diskette. Xircom utilities and online documentation will be
installed in a program group on your hard drive.
