Xirgo XT4971A Series User Manual Download

Page: 9 / 14

3.3 Trailer Cradle Mounting

An optional trailer mounting cradle can be purchased for easy device mounting for the XT4971A.

The cradle will need to be screw-mounted or VHB Tape mounted to the position desired. The

XT4971A can be easily fastened into the cradle via a Phillips head screw. The angled edged of the

cradle is designed to withstand the impact of snow scrapers that may come in contact to the

cradle if mounted on the top of a typical trailer.

3.4 Container Cradle Mounting

An optional container cradle can be purchased for easy device mounting for the XT4971A. The
cradle will need to be screw-mounted or VHB Tape mounted to the position desired. The

XT4971A can be easily fastened into the cradle via a Phillips head screw. The shape of the cradle

is designed to fit in the corrugations of an ISO standard freight container.

Summary of Contents for XT4971A Series















Search results

Summary of Contents for XT4971A Series

Reviews:

Related manuals for XT4971A Series

Brands by name

Popular brands

Xirgo XT4971A Series, User Manual

Search results

Summary of Contents for XT4971A Series

Reviews:

Related manuals for XT4971A Series

Brands by name

Popular brands