Method for Installation of Remote Control
Battery
Remove the battery compartment cover and insert
two AAA (No. 7, 1.5V) batteries; make sure the polarity
of the batteries is in compliance with the polarity mark
''+'' and ''-'' in the battery compartment of the remote
control.
Precautions for using the remote control
●
The remote control should be pointed at the
remote control sensor during operation. An
object placed between the remote control and
the remote control sensor may impede normal
operation.
●
The remote control should be prevented from
strenuous vibration. Besides, please do not set
or place the remote control under direct
sunshine, as heating power may result in
deformation of the remote control.
●
Remote control failure may occur when the
remote control sensor of the main unit is under
direct sunshine or strong lighting; in this case,
please change the angle of lighting or this TV
set, or operate the remote control near the
remote control sensor.
●
Low battery will influence the remote control
distance, in which case, the battery should be
replaced with a new one. If the remote control is
going to be idle for a long time or the battery
runs out, please take the battery out to prevent
the remote control from being corroded by
battery leakage which may result in damage and
failure of the remote control.
●
Please do not use batteries of different types. It
is not allowed to use old and new batteries
together; the batteries should be replaced in
pair.
●
Please do not throw the batteries into fire or
charge or decompose the batteries; do not
charge, short-circuit, disassemble/assemble,
heat or burn used batteries. Please dispose the
waste batteries pursuant to relevant regulations
on environmental protection.
Basic Operations
Remark:
1. The keys operation refers to remote control
operation, for panel control keys operation
please refer to ''
Panel Control Keys
'' operation
explanation.
2. Menu Operation Instruction in this manual is
explained according to TV mode. The operations
in other modes are similar to the one in TV
mode, and users can take it as reference.
Turning on/Standby
Before power-on platform, please make sure that
the power supply is stable.
Plug power cord into the electrical socket. Press
'' '' button on the TV set (If it doesn't have this button,
you needn't operate this step), then press [ ] key to
turn on the TV. When the first power on ,the screen
display ''Welcome'' menu, Press [
▲
]/[
▼
] key to select
language which you wish, then select
START
and
press [
OK
] key to confirm, the machine start auto
tuning after you select country.
In power on state, press [ ] key to switch to
standby mode.
★
Special Tips:
This device adopts energy saving
technology. If there is no signal input in power on
state, it will enter standby state automatically in five
minutes; The device will enter standby state
automatically at specified sleep time;
Signal source selection
You can connect various devices to the TV set and
view high quality images. If the video device has
HDMI, AV, PC and other video output ports. You can
select one of them and connect to corresponding input
ports of the TV set. After connected, turn on the device
and press [
SOURCE
] key, then menu of signal source
will be displayed on the screen. Press the [
▲
]/[
▼
]/[
t
]/
[
u
] key to select the input signal, and press [
OK
] key
to confirm .
Menu operation description
Press [
MENU
] key to show the main menu on the
screen:
1. Press [
▲
]/[
▼
]key to select a menu from
Parental Control
,
Setting
,
Channel
,
Sound
,
Picture
7
