4
BASIC FLIGHT OPERATION
Before flying (front direction)
The transmitter is Mode 2 when it comes out from factory. Change mode1
to mode 2 by multi-function button on the transmitter. Mode 3 and mode 4
is useless.
Quick Start Manual
Propeller installation
Before assembling the propellers, please
take down the hoop on the motor. Fix it by
using the propeller hoop after well loading.
Hold the motor by hand or wrench, insert a
2.5mm diameter rod into the hole of the
propeller hoop. Fix it by rotating the blades
as the reversing direction of the arrow
shown. Rotate it as the arrow direction to
disassemble it.
Cautions: The propellers should be correctly
assembled. Make sure the rotating direction
of the blades should be the same as the
rotating direction of the motor.
Assemble the
transmitter
Open the battery cover on the back of
Transmitter, load 6s “AA” batteries.
Caution:When Indicator light is flashing and
display low voltage on the LCD, please
change the batteries.
Battery 6XAA
