X380 5.8Ghz FPV Screen Installation (X380-55)
Page
1
of
3
Kit Contains:-
Screen holder
Thumb screws and nuts
4.3” FPV screen
USB charger for screen
Antenna
Video transmitter module
Camera to video transmitter cable
Cable ties
Installing the Screen Holder and FPV Screen
1.
Place the rear half of the screen holder onto the back of the transmitter,
the location lugs will line up with the holes on the transmitter.
2.
Place the front half of the screen holder on the front of the transmitter
in-line with the rear holder and screw in place with the two thumb
screws and nuts provided.
3.
Attach the antenna and screen bracket to the FPV Screen.
**Ensure that the 3 switches on the back are set to 1-2-3 in the
off position, (all 3 switches should be set nearest the antenna)**
