XK045004 – XKchrome RGB LED Headlight Kit
5.
Optional- Tap into the + turn signal wires:
Please check service manual
specific to your make and model to verify positive turn signal wires. First, tap
the Yellow wire into the LEFT side turn signal positive wire. Take the included
T-tap connector and secure it on the positive turn signal wire following the
diagram below. Put the wire in the groove of the T-tap connector, shut it, and
use plyers to lock the tab into place. Take the spade terminal on the yellow
turn signal wire and slide it over the installed T-tap connector to lock it in place.
Repeat for the right side of the vehicle. Tap the Black wire into the RIGHT side
turn signal positive wire. The Red sensor wire will not be used in this
application.
6.
Power on, download the
XKchrome
App, and enjoy!
Please note:
There are multiple XKGLOW apps
on the App Store. Only the XKchrome App will
work with the XKchrome Bluetooth Controller.
The App icon is pictured here.
