2
Fit the Hangers to Top Edge of the Door
Mark the Hangers location centrally, 430mm apart from the centre of the door’s top edge.
Pre-drill the Hanger bolts.
Drill 10mm holes into the top door edge 38mm deep and place the Hanger bolts into the holes.
Mark the position of the screw fixing holes and pre-drill, prior to permanently fixing the Hanger Bolts screws.
Fit the Track to the Pelmet
Fit the Track through its top horizontal edge into the underside of the Pelmet using 15mm screws.
The Pelmet Fascia is delivered separately to allow Track and Pelmet fitting.
65mm Min
83mm Max
Fit Track to
Pelmet
Pelmet
Fit Pelmet
to Wall
