background image

XLC DUO KIDS TRAILER BS-C10

Manual / 3092000705 / - 06

XLC DUO KIDS TRAILER BS-C10

Manual / 3092000705 / - 06

7

6

PARTS LIST

1 Frame w/canopy
2 Sling seat with 5-point safety harness
2 20” alloy wheels

1 Safety flag
1 Adjustable handlebar

1 Tow bar, tow bar coupler

• 

Bicycle trailers towed by Pedelec/ EPAC (Electronically Power Assisted Cycles) may be restricted by law.

• 

Please check national and local laws regarding the use of a Pedelec/ EPAC to tow a trailer.

•  All cargo should be secured so that it cannot shift. IMPORTANT: Instruct children riding in the trailer not to 

wobble, sway or lean.  Such movements can cause the trailer to tilt or tip over.

•  When fully loaded, the drawbar load measured on the hitch should be between 3-8 kg.   
•  Do not attempt to install other seating systems in this trailer.  It is not designed for car seats, pram seats, 

cots or other seating. The use of non-original accessories will invalidate the warranty and may cause 
damage to the trailer or injury to the occupants. Only spare parts supplied or recommended by the 

manufacturer/dealer may be used.

Follow the instructions for adjustment. The four-season guard must be fitted when there are children in the 

trailer. This protects the child from road dirt. 

4. MAIN CABIN FRAME AND ASSEMBLY

Take the trailer, the wheels, the drawbar and the walking kit out of the box. Put the small wheel of the walking kit 
aside as you will assemble it later. Place the trailer on the ground with the black fabric side down.

Summary of Contents for BS-C10












Reviews: