background image

XLC DUO KIDS TRAILER BS-C10

Manual / 3092000705 / - 06

XLC DUO KIDS TRAILER BS-C10

Manual / 3092000705 / - 06

9

8

To open frame

, first, lift front cabin tube up, place one hand on upper crossbar to stabilize frame, and then pull 

back with a quick “snap” of force on rear cabin tube (Fig 1), until you hear the audible “Click” as both sides of 

the trailer frame lock in place (Fig 2).

CLICK

After open, the trailer frame, look inside the trailer at the folding latches on both sides to make certain they have 

locked in place.  See photos below for reference:

Fig 1

Fig 2

CLICK

FOR 

HELP - 

PULL

If the latches look like the “WRONG!!” photo above, the trailer is not locked correctly.  Pull back on the tube until 
the latch locks in place as in the “RIGHT” photo above, or pull the string like shown on right picture.

You must make certain the frame is locked before using the trailer. Failure to do so could result in 

serious injury to you or your child. Make sure the spring latches are engaged on both sides prior to 

use.  Both latches are necessary for safe operation. Press forward on the rear frame tube to make 

sure the frame is locked.  If the frame moves forward as to fold, the frame is not secure.  If not 
latched, repeat above, pulling with some force until the frame locks with an audible “Click”.

!

5. INSTALLING WHEELS

Your XLC Mono Kids Trailer uses simple and convenient push button quick-release wheels.  To install the wheel, 
first push the button on the outside of the wheel hub, and insert the axle through the hanger bracket on the 

frame as shown.  Push all the way in and release the pushbutton.  The wheel is automatically locked in place.  

Give each wheel a tug to make sure they are secure.

Check the wheels 

periodically during and 
before each use to be sure 

they have not become 

loose.  Failure to do so 

could result in serious injury 

to you or your child. 

!

To close/fold trailer frame

, press handles together on right and left side. In case the handles are hard to press 

you can help out by pulling the string while pressing the handle.  

FOR 

HELP - 

PULL

Summary of Contents for BS-C10












Reviews: