background image

U

SE

R

 M

AN

U

AL

 N

S6

/N

S1

2P

/N

S1

2P

F

Service and warranty

About this Manual

This manual provides basic information explaining the functional-

ity, installation, operation and maintenance of the XLNT DataMotion 

NS6,NS12P and NS12PF 10/100Mb Ethernet switches.

This manual serves as a first reference for the use of this product.

Additional resources

For additional resources and documentation please visit 

www.xlnt-at.com.

Customer Service and Warranty

This product is supplied with a limited warranty for 12 months follow-

ing purchase.

To obtain warranty service, please contact your local XLNT dealer

Please do not send equipment to XLNT without authorisation. If 

asked to do so, please add a copy of the original invoice, together 

with the faulty device in a secure shipping container.

Recycling and hazardous substances

This product complies to the EU RoHS Reduction of Hazardous 

Substances directive (2002/96/EC) and WEEE  Waste Electrical and 

Electronic Equipment directive (2002/95/EC).

The selection of hazardous substances in all components and parts 

has been reviewed with care in order to comply with or exceed the 

RoHS directive.

If this product, when purchased and used in the EU, has reached the 

end of its useful life it may be returned to the original dealer at no 

cost, or to XLNT Advanced Technologies with a proof of ownership.

Summary of Contents for DataMotion NS12P
































Reviews: