14
10.3. Setting for Intermediate Position (Projection level)
a)
Turn on the projector and press UP/STOP or DOWN/STOP buttons to
position the lift to the level where the images are aligned perfectly on the
screen.
OR
b)
Press and hold the STOP button until the lift begin to move briefly (up and
down), the new position is recorded. (Note: The lift must be completely
stopped in the position before setting.)
more than 4 seconds
c)
To delete the intermittent position that previously recorded, press STOP
button, the lift will travel to the position that recorded.
d)
Press and hold the STOP button, until the lift begins to move briefly (up
and down), the intermittent position is deleted.
e)
Repeat step (a) and (b) to record the new position.
The Upper position (Store Level), intermediate position (Projection Level) and
Lower position (Service Level) are recorded. Press Up and Down button and operate
the lift to countercheck the recorded positions.
