2
Installation and Operation Manual
This manual explains how to install, operate and maintain the
X Cube lift
for video
projector. Please read carefully the manual before installation and keep it for future
reference. This manual is for installer, interior designer, architect, M&E consultant
and system integrator who has known about XLT X Cube lift.
IMPORTANT SAFETY INSTRUCTIONS
WARNING:
FAILURE TO FOLLOW ALL THE FOLLOWING
INSTRUCTIONS CAN RESULT IN SERIOUS PERSONAL INJURY OR
DAMAGE TO EQUIPMENT.
CAUTION
1)
The lift is not for out-door used.
2)
The Lift is intended for use in ordinary location.
3)
Please do not place or operate the lift in upside down position. The lift must
be properly installed at the ceiling before operating.
4)
Please do not allow children or mental disability person to operate the
equipment.
5)
Do not in
s
tall the lift on adjacent ceiling or light fixture.
6)
Entire bottom of the lift must be unobstructed to allow proper operation.
7)
The lift must be installed in level from front-to-back and side-to-side.
8)
Please do not attach any projector with the weight above maximum weight
capacity.
WARNING
1)
Please read the instructions before installation. Improper installation could
lead to serious injury or damage to the lift.
2)
Do not obstruct the operation of the lift with hands or any other object. It may
cause serious injury or damage.
3)
Keep hands and other objects away from the mechanism when the lift is
operating. Serious injury or damage could result.
4)
Clear all persons and obstructions along the lift travel path while it is
operating or in service.
