44
45
Manually tune through your local FM channels on your vehicle’s FM radio .
Locate and create a list of channels that aren’t being used by any FM radio
station . Write down the list . Once you have created your list of available
FM channels, you will need to find the one that provides the best match
for Edge .
TIP!
You’ll need to use the ‘Manual’ tune function on your vehicle’s FM radio to
tune through every FM channel one-by-one . Turn on your vehicle’s FM radio .
Start at 88 .1 and use the ‘Manual’ tune function on your vehicle’s FM radio to
tune through each FM channel one-by-one (88 .1 followed by 88 .3 etc .) to locate
channels that aren’t being used by a local FM radio station . Write down each FM
channel that has only static or silence on it, until you reach 107 .9 .
6
Ensure Edge is tuned to channel 1, the XM Preview channel . Upon power
up, Edge should tune to channel 1 by default, when it’s not yet activated .
If it’s not on channel 1, refer to “Listening to Satellite Radio” on page 55 to
learn about how to tune a channel .
7
Pick the first FM channel on your list
from step 5 . Turn on your vehicle’s FM
radio (if you have not already done so)
and tune it to this FM channel .
NOTE!
If you are using the Vehicle Dock
from the Universal Xpress Car Kit instead
of the PowerConnect Vehicle Dock which
came with your Edge, you will have to
disable AUX Detect . Refer to “Using the
Vehicle Dock From the Universal Xpress
Car Kit” on page 88, and complete the
additional instructions before continuing
with the next step . The audio connection
will be through your vehicle’s FM radio, but it is not PowerConnect .
8
Set your Edge to transmit on the same FM channel that you have selected
Vehicle Installation
1
preview
xmradio.ca
1-877-438-9677
1-877-438-9677
in step 7:
i . Press menu .
ii . Turn the Rotary Knob to scroll to and highlight
FM Settings and press the Select button .
iii . FM Channels will be highlighted . If it
is not highlighted, turn the Rotary
Knob to scroll to and highlight FM
Channels . Press the Select button .
iv . Turn the Rotary Knob to scroll to
and highlight the storage location
FM 2 and press the Select button .
v . Tune to the available FM channel
you choose in step 3 . Turn the
Rotary Knob
to tune in steps of .2,
i .e ., 99 .3 to 99 .5 . Press
and
to
tune in steps of 1, i .e ., 99 .3 to 100 .3 .
Press the Select button to select
the FM channel .
vi . Start Using is highlighted . Press
the Select button .
vii . The FM channel you selected will
be confirmed on the display screen .
90.1
6
jump
fm
menu
7
8
9
0
#
1
2
3
4
5
MATCH FM CHANNELS
Summary of Contents for EDGE
