Wireless NVR System User Manual
12
4.1.2 Login
After system initialized, the system will pop out below login interface. Users must log in to do further
operations.
Image 8
Operation Steps:
1.
Type in username. Default username is admin.
2.
Type in password. Default password is empty, means no password, leave it blank.
3.
Cli
ck “OK”, you shall be logged in
to the system.
Tips:
·
The password can be combined with numbers, letters or * #. The password length must be less
than 10.
4.1.3 Logout
If you want to log out while using the system, right click the mouse to pop out NVR main menu, click
“Exit System”,
and then
click “Logout”.
As shown in Image 9.
Image 9
If you want the system to auto lo
gout, please go to “System setting” –
“General setting”
, enable the
“Auto L
ogout
”, click “Apply” to save this setting. S
ystem will auto logout if there is no operation
within 1 minute. Username and password will be required for next login.
