Wireless NVR System User Manual
17
When use Match Code:
a.
Add new add-on camera to your xmartO system
b.
Re-pair camera to NVR when they lose connection
. You’ll need to delete the Network
Unreachable channel first, then re-pair the camera to an unoccupied channel. (Unoccupied
channel always shows No Video Source under Status.)
Note: IP cameras in pre-packed kits have already been paired to NVR. So cameras will auto connect to
NVR once they are plugged in power.
Operation Steps:
http://www.xmarto.com/helpcenter/?/article/9
1)
Connect the camera to your NVR’s Ethernet port with a n
etwork cable. Plug the camera to
power. The Ethernet port at the end of camera will blink, as shown in image 16.
Image 16
2)
Right click your mouse to pop out NVR main menu, then click Device Manage.
Click “Refresh”
on upper right and wait for a moment, yo
u’ll see the camera displays in upper box.
As shown
in image 18.
3)
Select the camera from upper box, and select an unoccupied channel from bottom box, click
“Match Code”. Wait for the system to pair, once finish, you should see the camera display
video on your monitor. You can then disconnect camera from NVR and move it to anywhere
you want. When it gets power, it will automatically connect to NVR and display on monitor.
(Camera needs to be in the
NVR’s
Wi-Fi range)