Wireless NVR System User Manual
29
Image 31
Tips:
DHCP is usually checked in default.
If your NVR is connected to Internet, the “Network Status” will show “Healthy Network”.
If check DHCP cannot get your NVR online, you can uncheck it and manually set the IP address for
NVR to get it online.
Detailed Feature List:
Name
Function Description
Note
IP Address
Set NVR’s IP address, user can set the IP address
manually
Uncheck DHCP, user will be able to
set IP address for NVR
Subnet Mask
Set the Subnet Mask
Gateway
Set the Gateway
MAC Address
Set the MAC Address
Avoid using same MAC Address in
LAN
Web Port
Transmit video signal and other control signals,
default is 80
Port 80 is used for web, PC client
and Mobile
DHCP
Check DHCP, NVR will obtain IP address from NVR
automatically
When DHCP is checked, user can
not set NVR IP address manually
4.4.2. DDNS
Function:
If you don’
t have a static IP, using DDNS (Dynamic DNS) to access your device via domain
name can effectively solve the problem caused by dynamic IP.
Tips: this is only necessary when you are not satisfied with the Cloud Device ID method. DDNS does
not rely on Cloud streaming so it may give you smoother remote connection.
