Wireless NVR System User Manual
32
2)
Check
“Enable” to enable the email
notification function.
3)
Enter the information of SMTP Server, Port, Username, Password, Sender, Receipt, etc. As shown
in image 35.
4)
Click “Test” to see if it is set successfully, if yes,
click “Apply” to save settings, and click “OK” to
exit.
Image 35
Detailed Feature List:
Function Name
Function Description
SMTP Server
The SMTP server of your sender email account, correct format: smtp.mail.yahoo.com
Port
The port number of the SMTP server
User Name
Username of your sender email account
Password
Password of your sender email account
Encryption Type
Leave it blank in default, if failed on test, then change to SSL
Sender
Full email address of sender email account
Sendee
Full email address of receiver email account
Delay
The time delay on receiving email alerts
Health Message
Interval
The frequency of receiving email in normal running/operation
Tips:
To receive email alerts, you need to check “E
-
Mail Notification” under Video Detection also.
Health Message Interval only takes effect when you check
“Enable”.
If failed to pass the test email, p
lease assure that you’ve enabled SMTP service for your email
account.
Please refer to
http://www.xmarto.com/helpcenter/?/article/2
for a more detailed email setup
guide.
