Wireless NVR System User Manual
12
4.1.2 Log in
After system initialized, the system will pop out below login interface. Users must log in to do further
operations.
Figure 8
Operation Steps:
1.
Left click mouse in the user name edit box to type in user ID and password. Default user ID is
admin.
2.
Left click mouse in the password edit box to type in user password. Default password is empty;
means leave it blank without typing anything.
3.
Click “OK”, you shall be logged in to the system.
Tips:
·
The password can be combined with numbers, characters or * #. The length should be less than 10
characters.
4.1.3 Log out
If you want to log out while using the system, you can right click the mouse, choose “Exit System”
from drop-down menu and click “logout”. As shown in Image 9.
Image 9
If you want the system to auto logout, please go to “System setup” – “General setup” to enable the
auto logout. The system will auto logout if there is no operation within 1 minute. User ID and
password will be required for next login.
