Wireless NVR System User Manual
17
2.
If you want to change camera of a certain channel, select and delete that channel in the NVR
channel list, match code the right camera to the channel you want.
Image 17 Image 18
3. Add One:
Add One is different from Match Code, add device via match code allows the NVR and IP Camera
transmits wirelessly, while Add One only allows for wired connection between IP Camera and NVR.
You need to connect the IP Camera to NVR using a network cable to view image if you use add one to
add current IP Camera to the NVR.
Right click mouse in your system, choose “IPC Add” from the drop-down menu to enter Video
Manage interface, click “Add One” to add current IP Camera.
4. Auto Add:
Auto Add is the same with Add One. You’ll need to connect IP Camera to NVR using a network cable
to view image if you choose Auto Add.
Right click mouse in your system, choose “IPC Add” from the drop-down menu to enter Video
Manage interface.
Connect IP Camera to your NVR using a network cable, click “Refresh” to get the IP Camera list that
connected to the NVR, click “Auto Add”, system will add the working IP Cameras to available channel
automatically, and your monitor will display the IP Camera’s video. Please DO NOT unplug the
network cable between the NVR and IP Camera. You can also add four cameras once using auto add,
if all 4 channels are available.
Tips:
·
Auto Add allows the system to search all the IP Cameras in LAN, and supports auto assign IP
addresses.
