Wireless NVR System User Manual
21
4.4.2. DDNS
Function Description:
If you don’t have a static IP, using DDNS (Dynamic DNS) to access your device
via domain name can effectively solve the problem caused by dynamic IP.
Tips: this is only necessary when you are not satisfied with the Cloud DEVICE ID method. DDNS does
not rely on Cloud streaming so it may give you smoother remote connection.
Operation Steps:
1.
Right click mouse in your system, choose “System setup” - “Network setup” – “DDNS”, you’ll then
see below interface, as shown in Image 23.
Image 23
2.
Select “Enable” to enable DDNS.
3.
Enter the Domain Name, Username and Password.
4.
Click “Apply” to save the settings.
Tips:
Currently supports domain providers: popdvr, 3322, changeip, no-ip, dyndns. Please apply for
your own DDNS from these providers before you use it.
Domain Name information cannot be edited if “Enable” is unchecked.
4.4.3 FTP
Function Description:
Used for uploading motion detection videos and sending alarm
Operation Steps:
1. Right click mouse in your system, enter “System setup” – “Network setup” – “FTP”, you’ll then
