Wireless NVR System User Manual
24
Operation Steps:
1. Right click mouse in your system, enter “System setup” – “Network setup” – “PPPoE”, you’ll then
see below interface, as shown in Image 26.
Figure 26
2.
Select “Enable”, enter the Username and Password provided by ISP.
Tips:
PPPoE Function:
for enable PPPoE, allowing access internet via dail-up;
for disable
PPPoE
4.4.6 3G
Function description:
this is to enable users who don’t have Internet service to use USB data stick to
connect the NVR to Internet.
Operation Steps:
1.
Right click mouse in your system, enter “System setup” – “Network setup” – “3G”, you’ll then see
below interface, as shown in Image 27.
