Wireless NVR System User Manual
28
8. Right click mouse to back to setup interface, click “Apply” to save settings.
Tips:
Presets are the tour spots, the PTZ tour from small to large spots automatically.
Keep time is the time length that the PTZ will stay at a preset.
Speed is the rotation speed that the PTZ tour from one preset to another preset.
4.6 Recording
4.6.1 Manual Record
Function Description:
Customers can turn on/off recording quickly under manual record mode
Operation Steps:
1. Right click mouse in your system, choose “Manual record”.
2. Select the channels you want to record.
2.
If you want all the channels to record, then click “Enable All”
3.
If you want to disable the manual record of all channels, click “Disable All”
4.
Click “OK” to finish the manual record setup. As shown in Image 31.
Image 31
Tips:
Recording Priority: Alarm Recording > Motion Detection Recording > Manual Recording > Time
Scheduled Recording
4.6.2 Time-scheduled Recording
Function Description:
Set time-scheduled recording, NVR will record in specified time period that set
by user.
Operation Steps:
1.
Right click mouse in your system, click “System setup”.
2.
Click “Record setup”, then “Record Plan”, you’ll then see below interface, as shown in Image 32.
