Wireless NVR System User Manual
30
4) Click “Apply” to save settings.
Tips:
If you want to set motion detection recording for other channels, repeat above steps
The default sensitivity is set to be “High”
Image 33
4.6.4 Alarm-triggered Recording
Function Description:
Enable alarm-triggered recording, system will starts recording when any alarm
input is detected.
Operation Steps:
1.
Right click mouse in your system, and choose “System setup” - “Record Plan” - “Sensor setup”,
you’ll then see below interface, as shown in Image 34.
Figure 34
2.
Select the channel you want to set as Alarm-triggered Recording from “Channel” drop-down
