Wireless NVR System User Manual
31
menu, set work Mode is “Enable”.
3.
Select the “Record channel”.
4.
Please refer to “4.6.2 Time-scheduled Recording Setup” to set the Alarm-triggered Recording;
make sure to check the “Alarm” box.
5.
Click “OK” to save the settings.
Tips:
Repeat above steps to set other channels to be Alarm-triggered Recording.
If other channels’ Alarm-triggered Recording settings are the same to this channel, click “Copy
to” to apply current channel’s settings to other channel or all channels.
4.7 Video Playback
4.7.1 Quick Playback
Function Description:
Enable fast playback, customers can quickly retrieval recent video data.
Operation Steps:
1.
Right click mouse in your system and choose “Video playback”
2. Select the playback time from drop-down menu, uses can select 5 minutes, 10 minutes, 30
minutes based on their needs. User can choose any channel to playback. As shown in Image 35.
Image 35
Tips:
Before you playback, please make sure that you’ve installed a hard drive in the NVR, and you’ve
enabled the recording.
4.7.2 Regular Playback
Function Description:
Enable normal playback, customers can search for videos based on recording
type and time.
