background image

Modules

6 - 76 Trusted Platform Module

6

Enabling & Managing TPM

1.

Restart the computer.

2.

Enter the 

Aptio Setup Utility

 pressing 

F2

 during the POST/startup.

3.

Use the arrow keys to select the 

Security

 menu.

4.

Select 

TPM Configuration

 and press Enter to access the sub-menu.

5.

Press Enter under 

Security Device Support

 menu and select 

Enable

.

6.

You will then need to press 

F4

 to save the changes and restart the computer.

7.

You can now manage the TPM from 

Windows

.

Clearing TPM 

Information

If you need to clear ex-
isting TPM information
then select 

Pending

Operation

 in the 

Secu-

rity Device Support

menu, and select 

TPM

clear

, and then press 

F4

to save the configuration
changes and restart the
system.

Figure 6 - 55

TPM State (Enable)

Summary of Contents for PRO 17































































































































































































































































































































































Reviews: