55
Use the diagram below to determine if the sprockets need to be replaced. Never use a new chain with a
damaged or worn sprocket.
1.
Check the upper
and lower
rollers for wear and
damage.
2.
If the rollers are worn or damaged, they must be
replaced before your next ride.
3.
If the roller has been worn down beyond the two points
marked in Fig. 1, then the roller(s) must be replaced.
4.
If you cannot or do not know how, take the motorcycle
to a Xmotos dealer for service.
Fig. 1
THE USE OF A NEW CHAIN ON A WORN
SPROCKET WILL CAUSE RAPID CHAIN
WEAR.
NOTICE
NEVER RIDE YOUR MOTORCYCLE IF THE
ROLLERS ARE WORN EXCESSIVELY.
CAUTION
ALWAYS USE HIGH QUALITY LUBRICANT
FOR THE DRIVE CHAIN.
NOTICE
BASIC MAINTENANCE PROCEDURES
DRIVE CHAIN Cont.
CHAIN ROLLERS
CHAIN ROLLER INSPECTION
Summary of Contents for XB31
